KTR110G-K75B Model - 6505-52-5540 |
||||||
|---|---|---|---|---|---|---|
| Figure | Part Number | Description | Quantity | |||
| 21 | Compressor housing | 1 | ||||
| 22 | 6505-11-0450 | V clamp ( compressor housing ) | 1 | |||
| - | C.H.R.A. | 1 | ||||
| 3 | 6505-51-3110 | Turbine wheel | 1 | |||
| 4 | 6505-51-0310 | Piston ring ( turbine side ) | 2 | |||
| 5 | 6505-51-0111 | Bearing | 1 | |||
| 2 | 6505-51-0711 | Heat shield | 1 | |||
| 14 | 6505-51-0011 | Bearing housing | 1 | |||
| 15 | 6505-51-0760 | O ring | 1 | |||
| 6 | 6505-51-0210 | Ring | 1 | |||
| 8 | 04022-04008 | Pin ( bearing housing ) | 1 | |||
| 7 | 6505-51-0151 | Thrust bearing | 1 | |||
| 9 | 6505-51-0252 | Flinger | 1 | |||
| 10 | 6505-51-0351 | Piston ring ( compressor side ) | 1 | |||
| 16 | 6505-51-0811 | Plate | 1 | |||
| 18 | 6505-51-0610 | Lockplate ( backplate bolt ) | 2 | |||
| 17 | 01010-30816 | Bolt ( backplate ) | 4 | |||
| 19 | 6505-51-1240 | Compressor wheel | 1 | |||
| 20 | 6505-11-0410 | Shaft nut | 1 | |||
| 1 | Turbine housing | 1 | ||||
| 11 | 6505-11-0520 | Clamp ( turbine housing ) | 4 | |||
| 13 | 6505-11-0550 | Lockplate ( turbine housing ) | 4 | |||
| 12 | 01010-61016 | Bolt ( turbine side ) | 8 | |||
| 100 | 409038-0000 | Gasket ( turbine inlet ) | 1 | |||
| 110 | 210019 | Gasket oil inlet | 1 | |||
| 115 | 210018 | Gasket ( oil outlet ) | 1 | |||
| 125 | 210318 | Gasket ent. y sal. water | 4 | |||
| Pressure actuator Type = Pressure | Angles | |||||
| NOT USED | α (alpha) = NOT disponible | |||||
| β (beta) = NOT disponible | ||||||
| Balance VSR | ||||||
| NOT RELEVANT | ||||||
Updated on October 13, 2008