KTR130-9G/2 Model - 6502-12-9005 | 
           ||||||
|---|---|---|---|---|---|---|
| Figure | Part Number | Description | Quantity | |||
| 1 | 6502-13-1411 | Compressor housing | 1 | |||
| 18 | 6502-12-1722 | V clamp ( compressor housing ) | 1 | |||
| - | C.H.R.A. | 1 | ||||
| 5 | 6502-12-5220 | Turbine wheel | 1 | |||
| 16 | 6502-12-1340 | Piston ring ( turbine side ) | 2 | |||
| 15 | 6502-14-1620 | Bearing | 1 | |||
| 17 | 6502-12-9520 | Heat shield | 1 | |||
| 3 | 6502-14-1611 | Bearing housing | 1 | |||
| 10 | 07000-63095 | O ring | 1 | |||
| 7 | 6502-12-1312 | Ring | 1 | |||
| 6501-11-1670 | Pin ( bearing housing ) | 1 | ||||
| 14 | 6502-12-1631 | Thrust bearing | 1 | |||
| 6 | 6502-20-1330 | Flinger | 1 | |||
| 13 | 6502-12-1340 | Piston ring ( compressor side ) | 1 | |||
| 9 | 6502-30-1640 | Insert plate | 1 | |||
| 12 | 6502-30-1650 | Lockplate ( backplate bolt ) | 2 | |||
| 11 | 01010-30625 | Bolt ( backplate ) | 4 | |||
| 4 | 6502-12-9210 | Compressor wheel | 1 | |||
| 8 | 6502-12-1352 | Shaft nut | 1 | |||
| 2 | 6502-12-9510 | Turbine housing | 1 | |||
| 19 | 6502-12-1713 | V clamp ( turbine side ) | 1 | |||
| 190098 | Gasket ( turbine inlet ) | 1 | ||||
| 210019 | Gasket oil inlet | 1 | ||||
| 190099 | Gasket ( oil outlet ) | 1 | ||||
| Pressure actuator Type = Pressure | Angles | |||||
| NOT USED | ||||||
| Balance VSR | ||||||
| NOT RELEVANT | ||||||
Updated on July 07, 2005