GT22256MS Model - 704136-0002 | 
        ||||||
|---|---|---|---|---|---|---|
| Figure | Part Number | Description | Quantity | |||
| 3 | 409589-0550 | Caracola admisión | 1 | |||
| 2 | 705067-0001 | Retaining ring ( compressor housing ) | 1 | |||
| 4 | 403069-0177 | O ring ( compressor housing ) | 1 | |||
| - | 431876-0125 | C.H.R.A. | 1 | |||
| 8 | Bearing housing | 1 | ||||
| 23 | Bearing | 2 | ||||
| 24 | 430064-0002 | Retaining ring ( bearing ) | 2 | |||
| 26 | 444379-0003 | Deflector ( bearing ) | 1 | |||
| 25 | 430765-0001 | Retén ( deflector aceite ) | 1 | |||
| 12 | Turbine wheel | 1 | ||||
| 13 | Heat shield | 1 | ||||
| 11 | 400749-0006 | Piston ring ( turbine side ) | 1 | |||
| 19 | Thrust collar | 1 | ||||
| 22 | Thrust bearing | 1 | ||||
| 21 | Screw ( coj. empuje ) | 3 | ||||
| 15 | Plate insercción | 1 | ||||
| 20 | 403069-0163 | O ring ( plato insercción ) | 1 | |||
| 14 | 400589-0181 | Retaining ring ( plato insercción ) | 1 | |||
| 17 | 403818-0009 | Piston ring ( compressor side ) | 1 | |||
| 10 | Compressor wheel | 1 | ||||
| 9 | 435255-0001 | Shaft nut | 1 | |||
| 7 | 704888-0002 | Turbine housing | 1 | |||
| 6 | 431518-0001 | Clamp ( turbine housing ) | 2 | |||
| 5 | 400677-0816 | Bolt ( turbine side ) | 4 | |||
| 31 | 700174-0033 | Actuator | 1 | |||
| 32 | 704139-0001 | Bracket ( actuator ) | 1 | |||
| 27 | 400774-0001 | Nut ( actuator ) | 2 | |||
| 1 | 400724-0510 | Screw ( soporte ) | 2 | |||
| 30 | 431056-0040 | Hose ( actuator ) | 1 | |||
| 29 | 400696-0005 | V clamp ( hose ) | 2 | |||
| 28 | 400702-0018 | Retaining ring ( actuator ) | 1 | |||
| 100 | Gasket exhaust manifold | 1 | ||||
| 105 | Gasket ( turbine outlet ) | 1 | ||||
| 115 | 210243 | Gasket ( oil outlet ) | 1 | |||
| Pressure actuator Type = Pressure | Angles | |||||
| N/D | δ (delta) = N/D | |||||
| ε (epsilon) = N/D | ||||||
| Balance VSR | ||||||
| 1.5G between 0 - 80.000 rpm | ||||||
Updated on August 17, 2008