GT1752H Model - 454061-0011 |
||||||
|---|---|---|---|---|---|---|
| Figure | Part Number | Description | Quantity | |||
| 3 | 435791-0032 | Caracola admisión | 1 | |||
| 1 | 433351-0001 | Bolt ( compressor side ) | 4 | |||
| 4 | 403069-0177 | O ring ( compressor housing ) | 1 | |||
| - | 433289-0010 | C.H.R.A. | 1 | |||
| 25 | 434714-0009 | Turbine wheel | 1 | |||
| 10 | 436131-0002 | Compressor wheel | 1 | |||
| 8 | 433275-0005 | Bearing housing | 1 | |||
| 16 | 434689-0004 | Plate | 1 | |||
| 13 | 434302-0001 | Heat shield | 1 | |||
| 7 | 435788-0027 | Turbine housing | 1 | |||
| 6 | 435782-0001 | Clamp ( turbine housing ) | 2 | |||
| 5 | 400788-0610 | Bolt ( turbine side ) | 4 | |||
| 26 | 433489-0005 | Actuator | 1 | |||
| 43 | Rod end ( actuator ) | 1 | ||||
| 42 | Nut ( rod end actuator ) | 1 | ||||
| 30 | 432996-0006 | Hose ( actuator ) | 1 | |||
| 31 | 400696-0009 | V clamp ( hose ) | 2 | |||
| 28 | 400702-0018 | Retaining ring ( actuator ) | 1 | |||
| 100 | 210338 | Gasket ( turbine inlet ) | 1 | |||
| 105 | 210350 | Gasket ( turbine outlet ) | 1 | |||
| 111 | 430066-0005 | Fitting oil inlet | 1 | |||
| 112 | 435197-0006 | Washer ( racor ent. aceite ) | 1 | |||
| 115 | 210243 | Gasket ( oil outlet ) | 1 | |||
| Pressure actuator Type = Pressure | Angles | |||||
| N/D | δ (delta) = 238º | |||||
| N/D | ε (epsilon) = 115º | |||||
| Balance VSR | ||||||
| 1.0G between 0 - 90.000 rpm | ||||||
| 1.5G between 90.000 - 138.000 rpm | ||||||
Updated on September 10, 2008