GT2252 Model - 452187-0001 | 
        ||||||
|---|---|---|---|---|---|---|
| Figure | Part Number | Description | Quantity | |||
| 3 | 436182-0005 | Compressor housing | 1 | |||
| 1 | 433351-0001 | Bolt ( compressor side ) | 4 | |||
| 4 | 403069-0164 | O ring ( compressor housing ) | 1 | |||
| - | 451298-0006 | C.H.R.A. | 1 | |||
| 25 | 434716-0005 | Turbine wheel | 1 | |||
| 10 | 436131-0001 | Compressor wheel | 1 | |||
| 8 | 433275-0002 | Bearing housing | 1 | |||
| 16 | 434689-0002 | Plate | 1 | |||
| 13 | 434685-0001 | Heat shield | 1 | |||
| 7 | 436313-0001 | Turbine housing | 1 | |||
| 6 | 435782-0001 | Clamp ( turbine housing ) | 2 | |||
| 5 | 400788-0610 | Bolt ( turbine side ) | 4 | |||
| 26 | 433143-0005 | Actuator | 1 | |||
| 27 | 413853-0001 | Nut ( actuator ) | 2 | |||
| 43 | 413885-0003 | Rod end ( actuator ) | 1 | |||
| 42 | 432502-0001 | Nut ( rod end actuator ) | 1 | |||
| 30 | 400729-0051 | Hose ( actuator ) | 1 | |||
| 31 | 451050-0001 | V clamp ( hose ) | 2 | |||
| 28 | 400702-0025 | Retaining ring ( actuator ) | 1 | |||
| 100 | 210218 | Gasket ( turbine inlet ) | 1 | |||
| 105 | 210270 | Gasket ( turbine outlet ) | 1 | |||
| 115 | 210243 | Gasket ( oil outlet ) | 1 | |||
| 155 | 431411-0840 | Stud outlet | 3 | |||
| 155 | 210407 | Stud outlet | 2 | |||
| Pressure actuator Type = Pressure | Angles | |||||
| 1.075 - 1.115 bar = 1.00 mm | δ (delta) = 340º | |||||
| ε (epsilon) = 100º | ||||||
| Balance VSR | ||||||
| 0.8G between 0 - 60.000 rpm | ||||||
| 1.2G between 60.000 - 108.000 rpm | ||||||
Updated on August 17, 2008